Friday, May 24, 2019
Wednesday, May 22, 2019
Monday, May 20, 2019
Monday, May 6, 2019
Today is the beginning of week 13 and this week we plan on finishing the code for our robot and then hopefully complete the tetrahedron challenge. Our dream goal for this week is if maybe we can get to the racket ball challenge but we shall see. Our Solid Works model is now complete!
at May 06, 2019
Thursday, May 2, 2019
Tuesday, April 30, 2019
Today is the beginning of week 12 and we will finish tightening up our robot wherever is needed and lastly begin on working with the code for the tetrahedron challenge if we don't get delayed because of the solid works certification (which will most likely happen).
Friday, April 26, 2019
To summarize this entire week we have finished the robot claw fully and we are now in the process of installing the motor. We will take time to make sure everything is stable and nothing will come loose in order to prevent future breakdowns, etc. On a side note if we have a little bit of time we will practice on Solid Works since the certification is coming around once again.
Monday, April 22, 2019
This week our goal is to definitely finish our robot's claw fully. We must complete it this week with no exceptions because we have stayed on this for far too long. Our second goal for the week is to hopefully reach the coding part in our robot for the tetrahedron part.
Wednesday, April 17, 2019
Today marks the end of week 10 since we have no school on Friday. We have made some good progress with our robot (more than we expected) which is fantastic and our goal for next week is to finish the claw 100%, no exceptions. For now we will work as hard as we can to get as far as we can with it.
Monday, April 15, 2019
Thursday, April 11, 2019
Today marks the end of week 9 and so far we have progressed further into our claw but not as fast as we had originally hoped for. We can't dedicate 100% of the class period anymore because we have mini study sessions in Solid Works so we aren't sure anymore when we will finish the claw.
Today is the last week for week 14 and we are so close to finishing the coding for our robot by next week it will be 100% finished and we ca...
This week we are tasked with completing our elegant blog setup. We first start with our bios for each team member, then publish our first b...
Today is the beginning of week 12 and we will finish tightening up our robot wherever is needed and lastly begin on working with the code fo...